Standard Protocols
Advanced Techniques
Under development
General Advice
Inspiration
Sidebar
microfluidic_temperature_control
Temperature Control Setup
- Peltier, Warner SC-20 Dual In-line Solution Heater/Cooler (www.warneronline.com)
- Peltier controller, CL-100 Bipolar Temperature Controller (www.harvardapparatus.com)
- Syringe Pump, Harvard Apparatus Remote Infuse/Withdraw PHD 4400 Hpsi Programmable
- Peristaltic pump, Harvard Apparatus, Peristaltic Pump 66
- Peristaltic pump tubing: Tygon, R-1000 1/8 in. ID * 1/4 in. OD
- Syringe pump/Peltier tubing, Harvard Apparatus, “Microline” tubing 0.5 mm ID * 1.5 mm OD
- Peltier metal tube/“Microline” tubing interface, Warner, Polyethylene tubing 1.57OD * 1.14ID (furnished with Peltier module)
- Microfluidic device/“Microline” tubing interface, Harvard Apparatus, Stainless steel tubing coupler, 23-Gauge, 8 mm
- Syringe for water injection, Monoject, 140cc Syringe with Luer Lock Tip
microfluidic_temperature_control.txt · Last modified: 2019/09/09 21:10 by ethanminot
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
