Minot Lab Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

Temperature Control Setup

    * Peltier, Warner SC-20 Dual In-line Solution Heater/Cooler (www.warneronline.com)
    * Peltier controller, CL-100 Bipolar Temperature Controller (www.harvardapparatus.com)
    * Syringe Pump, Harvard Apparatus Remote Infuse/Withdraw PHD 4400 Hpsi Programmable
    * Peristaltic pump, Harvard Apparatus, Peristaltic Pump 66
    * Peristaltic pump tubing: Tygon, R-1000 1/8 in. ID * 1/4 in. OD
    * Syringe pump/Peltier tubing, Harvard Apparatus, “Microline” tubing 0.5 mm ID * 1.5 mm OD
    * Peltier metal tube/“Microline” tubing interface, Warner, Polyethylene tubing 1.57OD * 1.14ID (furnished with Peltier module)
    * Microfluidic device/“Microline” tubing interface, Harvard Apparatus, Stainless steel tubing coupler, 23-Gauge, 8 mm
    * Syringe for water injection, Monoject, 140cc Syringe with Luer Lock Tip

http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2997723/