Minot Lab Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Lab Notebook ======

It is fun and informative to look at the lab notebooks of other scientists. For example, [[Don Eigler's lab notebook]] where he recorded the discovery that he could move atoms around with an STM tip. 

There are two primary motivations behind the keeping of a good lab notebook. One is legal. When a discovery is challenged, the lawyers need the notebooks. The notebook must follow a certain protocol in order to defeat accusations of falsification.  

The second motivation is more important to most academics. You have to remember what you did, why you did it, and what happened. You need to recall these things 3 or 4 years after doing the experiment. You need details. At the end of a PhD program you will be writing a paper that could very well be connected to the entirety of your experience in the program, so you should be able to look back and reference everything you’ve done.
  *Date  -  Write the date at the top of every new day’s data.   (e.g.  07/18/2011)
  *Why and How  - At the start of every new experiment or section of experiment, write down the reasoning behind doing the day’s experiment and why you’ve picked the specific variables you have.   Include as well a summary of the details of what you will do.
  *References  -  Include in the Why and How section where you got the ideas that you did. Cite any papers you are reading that have influenced the experiment. This is very important, since when you go to write your own paper you will need to make these citations, and it’s way more convenient to have them waiting in your lab notebook.
  *Data  -  Record all data. You should print out AFM pictures and other graphs and paste them in. It’s preferable to record hand written data in tabular form so that it’s easier to follow later on.  Also include references to the file names of the AFM or other data files (dates and names) so that they can be viewed later.
  *Conclusions  -  Try to write conclusions on the day’s experiment.  Similar to the introductory Why and How, this will allow you to remember the why behind what you’re doing (probably in your next experiment) and what you’ve learned. 
  *New tools and skills  -  when learning a new tool or lab skill, take care to write down every detail of the procedure in your notebook for that day.  You should be able to perform the same operation in the future using your notebook notes.

To make a "watertight" notebook that lawyers will like:
  *Fill up every page.  Do not allow space to go back and make notes on a previous day’s work.  If your experiment for the day only covers half the page, draw a line through the empty space at the bottom to signify that you haven’t gone back to change something, or just start your next day’s notes immediately below the previous day’s notes, interrupting the two with a new date.
  *Don’t skip pages.
  *If you make a change to your data than don’t erase the previous data.  Draw a single line through the data and then write the modification on the side.  Write your initials next to the change.  This signifies that you are honest about your changes.
  *Sign the bottom of your notes every day and have someone else sign them every five days.  
  *Lab notebooks must be kept in pen. A pencil record is no good for proving that you discovered something first.



=====Clean room notebook=====
You must also make notes about how you fabricate devices. If you are working in the cleanroom, the detailed fabrication notes will typically be made in your cleanroom notebook. If all your fabrication work is done outside the cleanroom, it is OK to keep your fabrication note in your lab notebook.


=====Complementing your lab note book with computer files====

Choose a organization protocol for your "raw data" computer files. Stick to this organization protocol. You should be able to find an entry in your lab notebook and easily locate the accompanying AFM file or I-V curve. Here is a default protocol, you can improve upon it if you wish: 

  *On the AFM computer store files as follows: Your_name/Data/2007-07-07/Image_001 
  *For every file on the computer, there should be a corresponding description in your lab notebook. Your lab notebook might look like this: "2007-07-07. Chip C1: tried to grow tubes yesterday. Now checking for tube growth
    *Image_001 Good image, 10x10 micron, see lots of tubes, oxide looks very clean"

We also make powerpoint files (collections of graphs, images and captions), excel spread sheets (keeping track of all the devices on a chip, which are working, when they were measured etc.), numerical modeling code, and data analysis files. These computer files are very useful, but are secondary ways to organize your work. The raw information should always be in the lab notebook.