Differences

This shows you the differences between two versions of the page.

--- vacuum_pumps [2024/06/11 11:44] – ethanminot
+++ vacuum_pumps [2024/06/11 11:48] (current) – ethanminot
@@ Line 26: / Line 26: @@
   * Close the cap on the fill port. Do not over tighten.
   * Using the funnel again, pour the dirty oil into the waste bottle. Ensure that the waste bottle is correctly labelled.
+  * Record what you did in the log book of the equipment. Include the type of oil that you used.
 *Choosing the right oil: The customer service at Duniway Stockroom is excellent. You can call them, describe the kind of pump, and they'll recommend a type of oil.
-The e-beam evaporator system is pumped by an Edwards ED660. This is an old pump (obsolete for >30 years) but still runs great. Based on recommendation from Duniway Stockroom, we are using Mechanical Pump Oil - 1 gallon, Semi-Synthetic, Ultra 70 ( MPO-ULTRA70-1 ), ~ $60 per gallon. Oil change takes about a half gallon.
+The e-beam evaporator system is pumped by an Edwards ED660. This is an old pump (obsolete for >30 years) but still runs great. Based on recommendation from Duniway Stockroom, we are using Mechanical Pump Oil - 1 gallon, Semi-Synthetic, Ultra 70 ( MPO-ULTRA70-1 ), ~ $65 per gallon. Oil change takes about a half gallon.
 {{::ed660.jpeg?350|}}
 {{::nameplateed660.jpeg?350|}}