Minot Lab Wiki

User Tools

Site Tools

Trace: • group_meetings
safety

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
safety [2022/09/20 11:18] – dublinsafety [2023/03/10 14:00] (current) – ethanminot
Line 4: Line 4:
  
 All lab users are required to complete OSU's online training modules for basic lab safety. You must go through this process before you are given keys to the lab. All lab users are required to complete OSU's online training modules for basic lab safety. You must go through this process before you are given keys to the lab.
-  * Go to the [[http://oregonstate.edu/ehs/training-materials|OSU EHS training materials]] +  * Ethan will add your name to the lab safety management tool (SciShield) which is administered by OSU's Environmental and Health Safety (EHS) Department.  
-  * Scroll down to "Laboratory and Chemical Safety" +  * SciShield will contact you will a list of training materials. This will include things like hazardous waste awareness, compressed gas safety, sharps safety, eyewash and safety showers and fume hood safety. 
-  * You will see list of required training modules (as of May 2019 the three required modules are "Lab Safety Training", "Safety Data Sheets & Haz Comm", and "Hazardous Waste") +  * Complete the online training modules. You'll be logged in with onid credentials and the SciShield system will record the trainings.
-  * Complete these online modules. Use your onid username/password to take the quiz or to acknowledge completion. +
-  * You will receive emails verifying completion of each module. Forward these emails to Ethan.+
  
-As a complement to the basic lab safety training, you must also complete this quiz which is specific to the Minot Lab: {{::chem_safety_quiz9.doc|}}. Make a hard copy (print out) of this safety quiz, fill in the answers, and give it to Ethan. Some of the answers are found on this wiki page. Scroll down to see information specific to the Minot Lab. +As a complement to the basic lab safety training, you must also complete this quiz which is specific to the Minot Lab: {{::chem_safety_quiz9.doc|}}. Fill out this quiz and email it to Ethan. Some of the answers are found on this wiki page— scroll down to see information specific to the Minot Lab. 
  
 ===Beyond the basic training=== ===Beyond the basic training===
Line 16: Line 14:
 Research projects in our lab often use  Research projects in our lab often use 
   *Fume hoods   *Fume hoods
-  *Compressed gas cylinders+  *Compressed gas cylinders ([[https://www.youtube.com/watch?v=9-f5zfMH7QI|1-minute YouTube video]])
   *Lasers   *Lasers
   *Cryogenic liquids/gases   *Cryogenic liquids/gases
Line 40: Line 38:
 The notes below highlight some of the points you learned in OSU online training modules, and how they apply to our labs in 306 and 308 Weniger. These notes are not a substitute for the online training. The notes below highlight some of the points you learned in OSU online training modules, and how they apply to our labs in 306 and 308 Weniger. These notes are not a substitute for the online training.
  
-===== Liquid Chemicals and Powdered Substances =====+==== Liquid Chemicals and Powdered Substances ====
   *There is one fume hood for organic solvents (acetone, ethanol, IPA) and one fume hood for acids. Never bring the organic solvents into the acid hood. Never bring acids into the organic solvent hood. This absolute/unbreakable rule protects us from the risk of accidentally mixing an oxidizing agent (e.g. nitric acid, see [[http://www.youtube.com/watch?v=FXhE57b5ofw|video]]) with a hydrocarbon fuel (e.g. acetone or IPA).    *There is one fume hood for organic solvents (acetone, ethanol, IPA) and one fume hood for acids. Never bring the organic solvents into the acid hood. Never bring acids into the organic solvent hood. This absolute/unbreakable rule protects us from the risk of accidentally mixing an oxidizing agent (e.g. nitric acid, see [[http://www.youtube.com/watch?v=FXhE57b5ofw|video]]) with a hydrocarbon fuel (e.g. acetone or IPA). 
   *Take labeling very seriously. There should never be unlabeled liquid in the lab, even for a second. It is very hard to identify a chemical when it has been forgotten (it only take one distraction to mix up two beakers). This rule protects our devices, protects us from accidentally mixing the wrong chemicals and protects us from treating dangerous chemicals as if they were safe.   *Take labeling very seriously. There should never be unlabeled liquid in the lab, even for a second. It is very hard to identify a chemical when it has been forgotten (it only take one distraction to mix up two beakers). This rule protects our devices, protects us from accidentally mixing the wrong chemicals and protects us from treating dangerous chemicals as if they were safe.
   *Before using a chemical for the first time, read the [[http://en.wikipedia.org/wiki/Material_safety_data_sheet|MSDS]]. In the lab there is a folder of MSDS sheets (they are shipped with the chemical, save the MSDS when you open a box!). If the MSDS is not in the lab folder, you must print a copy and add it to the folder (go to the manufacture website or try an [[http://www2.siri.org/msds/index.php|online database]]).    *Before using a chemical for the first time, read the [[http://en.wikipedia.org/wiki/Material_safety_data_sheet|MSDS]]. In the lab there is a folder of MSDS sheets (they are shipped with the chemical, save the MSDS when you open a box!). If the MSDS is not in the lab folder, you must print a copy and add it to the folder (go to the manufacture website or try an [[http://www2.siri.org/msds/index.php|online database]]). 
   *We use HF (hydrofluroic acid) in Weniger 306. HF is arguably the most dangerous acid used at the university. Anyone wanting to use HF or the acid hood needs additional training. Some useful links include [[http://web.princeton.edu/sites/ehs/labguide/sec_2e.htm#acid|Princeton Uni. EHS]], [[https://emergency.cdc.gov/agent/hydrofluoricacid/basics/facts.asp|Center for Disease Control]]   *We use HF (hydrofluroic acid) in Weniger 306. HF is arguably the most dangerous acid used at the university. Anyone wanting to use HF or the acid hood needs additional training. Some useful links include [[http://web.princeton.edu/sites/ehs/labguide/sec_2e.htm#acid|Princeton Uni. EHS]], [[https://emergency.cdc.gov/agent/hydrofluoricacid/basics/facts.asp|Center for Disease Control]]
-==== Fume hoods - General info ====+ 
 +{{::don_t_cross_your_waste_streams.png?0x250}} 
 + 
 +===== Fume hoods - General info =====
 |{{::screen_shot_2014-01-09_at_7.56.49_pm.png|}}|This picture shows the standard posture for using a Fume hood. The sash is in between the chemicals and the users face. The chemicals are at least 6 inches inside the hood. The airflow ensure that no fumes escape from the hood. The man in the picture should be wearing safety glasses!| |{{::screen_shot_2014-01-09_at_7.56.49_pm.png|}}|This picture shows the standard posture for using a Fume hood. The sash is in between the chemicals and the users face. The chemicals are at least 6 inches inside the hood. The airflow ensure that no fumes escape from the hood. The man in the picture should be wearing safety glasses!|
  
-===== Solvent Fume Hood =====+ 
 + 
 + 
 +==== Solvent Fume Hood ====
 Required protective clothing (minimum): Required protective clothing (minimum):
   *Safety goggles    *Safety goggles 
safety.1663697918.txt.gz · Last modified: 2022/09/20 11:18 by dublin