Differences

This shows you the differences between two versions of the page.

--- e-beam [2021/01/25 15:27] – ethanminot
+++ e-beam [2021/04/20 11:22] (current) – dublin
@@ Line 6: / Line 6: @@
 More information about crucibles is below.
+Important information on deposition of different materials (as well as which crucibles to use) is found on the [[https://www.lesker.com/newweb/menu_depositionmaterials.cfm?section=evapac&init=skip|Kurt J. Lesker site]].
 The evaporator chamber can also be used for vacuum anneals (see below)
@@ Line 29: / Line 31: @@
 [[https://www.lesker.com/newweb/deposition_materials/depositionmaterials_evaporationmaterials_1.cfm?pgid=ti1|Titanium]] - FABMATE
+====Q-Pod Manual/Tooling Factor===
+[[https://products.inficon.com/getattachment.axd/?attaName=1b26fb75-a92c-4161-8fad-177f82144304|The Q-Pod manual can be found here.]] It contains the process for determining tooling factor:
+{{ebeam:determining_tooling_factor.png}}
+As well as densities and z-ratios for many different materials (p. 63 Table A-1)
 ====Vacuum Anneal ====